Klein Tools IR5E Manual De Instrucciones página 9

BATTERY REPLACEMENT
When the
be replaced.
1. Open the battery compartment
compartment cover away from the trigger at the indentations.
2. Remove the exhausted 9-V battery and dispose of it appropriately.
3. Replace the 9-V battery and then replace the battery compartment
cover, ensuring that it locks into place.
Make sure that the meter is turned off and wipe with a clean,
dry, lint-free cloth. Do not use abrasive cleaners or solvents.
Take care to keep the sensor lens clean at all times. If required,
loose debris may be removed from the lens using clean
compressed air. The lens may also be cleaned using a soft
cloth or cotton-wool ball with water or rubbing alcohol only .
The lens must be allowed to dry completely prior to use.
Remove the battery when the meter is not in use for a prolonged
period of time. Do not expose to high temperatures or humidity.
After a period of storage in extreme conditions exceeding the
limits mentioned in the General Specifications section, allow the
meter to return to normal operating conditions before using.
Do not place the equipment and its accessories
into a domestic rubbish bin. Items must be properly
disposed of in accordance with local regulations.
MAINTENANCE
indicator is displayed on the LCD, the battery must
CLEANING
STORAGE
WARRANTY
www.kleintools.com/warranty
DISPOSAL/RECYCLING
CUSTOMER SERVICE
KLEIN TOOLS, INC.
450 Bond Street
Lincolnshire, IL 60069, USA
international@kleintools.com
www.kleintools.com
by pulling the battery
6
9