Operation; Front Panel Controls - BK Precision 600 Manual De Instrucciones

Section 2 Operation

FRONT PANEL CONTROLS

Refer to the Front view of the unit.
1) AH Range :
2) Select LED:
3) Locked LED:
4) Display Mode :
5) Batt. Voltage :
6) % Balance Capacity:
7) Load Test:
8) Ready:
9) Test On:
10) Reverse Polarity:
NOTE: Specifications and information are subject to change without notice.
Please visit www.bkprecision.com for the most current product information.
4
With this key the user can select the
correct AH range according to the battery
under test.
This LED glows to indicate that user can
select the AH range.
This LED is ON when the unit locks to a
particular AH range set by the user.
This key selects the display either as
No load voltageor % balance
capacity.
When display indicates Batt. voltage this
LED glows.
This LED glows when remaining capacity
is displayed.
The test starts by pressing this key.
When this LED glows steadily, it indicates
that the unit is ready to conduct a test.
This LED glows for approx. 2 sec. when
the battery test is carried out.
If the unit is connected to a battery in
reverse polarity this LED