Operating your Breville ikon Grill
To use as a sandwich press
1. Insert the plug into a 110/120volt power outlet
and switch the power on. The red power 'On'
light will illuminate
2. Ensure the Removable Drip Tray is correctly
inserted and positioned back into the appliance.
3. Ensure the top and bottom plates grill plates are
securely locked into position.
4. Ensure the top plate is in the closed position for
more efficient preheating.
5. Turn the Base Plate Tilt Dial to the Flat position.
6. Turn the variable heat control dial to the
'Sandwich' position.
7. Allow the ikon Grill to preheat until the green
'READY' light illuminates.
8. During this time, prepare the sandwich and place
it onto the base cooking plate. Always place
sandwiches towards the rear of the bottom
cooking plate.
9. Close the top cooking plate which has a floating
hinge that is designed to evenly press down the
sandwich. The top plate must be fully lowered to
cook sandwiches. The Grilling Height Control on
the right hand side of the top plate is used to
adjust for the thickness of the sandwich.
10. Toasting should take approximately 5-8 minutes.
Exact toasting time will be a matter of
preference. It will also depend on the type of
bread and filling used.
11. When the sandwich is cooked, use the handle to
open the top plate. Remove the sandwich using a
plastic spatula. Never use metal tongs or a knife
as these can cause damage to the non-stick
coating of the cooking plates.
ALWAYS ALLOW THE IKON GRILL PLATES TO COOL DOWN BEFORE RELEASING
AND REMOVING.
8
continued
The green 'READY'light will cycle on and off during
the toasting process indicating that the correct
temperature is being maintained.
Always allow the ikon Grill to preheat until the green
'READY' light illuminates.
Using the plate release feature
Your ikon Grill features as a plate "Release" button
which allows you to separately remove the top and
bottom grill plates. It also enables you to safely and
conveniently wash grill plates.
Releasing the grill plates
1. After cooking allow the ikon Grill to cool down.
2. To remove the grill plates press the "Release"
buttons located on the front on the top button
panel. The plates will unlock from the front
where they can then be released individually
(See Fig 3).
3. Once released hold the plates and remove
(See Fig 4).
Fig 3
Fig 4
ALWAYS ALLOW THE IKON GRILL PLATES TO COOL DOWN BEFORE RELEASING
AND REMOVING.
FULLY UNWIND THE CORD FROM THE CORD STORAGE FACILITY BEFORE USE.
Using the adjustable grilling height
control feature
Your ikon Grill features an adjustable Grilling height
control feature which allows you to fix the top plate
to a range of positions above the bottom plate.
This allows your ikon Grill to be used as an open
toaster ideal for toasting open sandwich style 'melts'.
It can also be used to grill delicate hamburger buns
without squashing.
1. Allow the ikon Grill to preheat until the green
'READY' light illuminates.
2. Place the food to be grilled on the base plate.
3. Move the Adjustable Grill Control Slide on the
right hand side of the smart ikon Grill to the
desired height (see Fig 5).
Fig 5
4. Slowly lower the top plate until it rests in the
appropriate position above the food.
9