Led Indicator Status - Ezviz CS-X5S-16H Guia De Inicio Rapido

Linkage
Link through Monitor
• M ake sure that the camera and device are using the same network, wired or wireless.
• T he wireless camera in its initial state can be added to the device's Wi-Fi network by the following steps.
Power on all devices before you start.
• R eset the camera if it has been connected to Wi-Fi before.
• T he camera and device should be within the distance of up to 10 m (32.8 feet). Stay away from wireless device or
barriers to avoid signal decreasing.
1. Go to Camera Management by Menu
2. When camera is ready to connect Wi-Fi, click Search.
3. Click "+" to add linked camera.
The camera will automatically connect to the device.

LED Indicator Status

Within 10m (32.8 ft)
Camera.
LED Indicator Status
Steady Green Working Properly
Steady Red
LED Indicator
Flashing Red Restore Factory Defaults
4
Device Exceptions or Alarm