Badabulle B001006 Instrucciones De Uso página 7

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
INSTRUCTIONS FOR USE OF THE BOTTLE HEATER
1 - Use the Blending Bowl (C) to pour
2 - Place the diced foods in the main
the water in the Heating Tank (H).
bowl with or without the basket
Fill the tank with the amount of
(J).
water indicated in the cooking
guide (N).
5 - Turn the Blending Bowl (C)
clockwise to lock it.
4 - Once cooking is complete, pour
the foods in the Blending Bowl
(C). Remember to also pour the
cooking liquid from the Liquid
Collector (I) into the Blending
Bowl for added flavour and
vitamins.
7 - Press the Blending Button
(E) to blend. ATTENTION:
press the button for short
bursts of 5 seconds to
prevent overheating. Stop
if the Blending Blade (D)
spins without any resistance.
(Otherwise, refer to point
15 of the instructions for
use).
12
INSTRUCTIONS FOR USE
MEAL PREPARATION
1 - Place the appliance on a flat, stable surface. Ensure the appliance and the
2 - Ensure the mains power is suitable for the appliance. If it is, plug the
3 - Remove the steamer lid (L), the main bowl (K), the basket (J) and the cooking
4 - Remove the blending bowl (C). Fill it with water as per the quantities shown
5 - Add the appropriate amount of water to the Heating Tank (H).
6 - Replace the cooking water vessel (I), the main bowl (K). Place the food into
3 - Press the Cooking Button (F)
7 - Replace the Steamer Lid (L). Warning: The Steamer Lid has no locking
to start cooking.
8 - Press the Cooking Button (F) once. An indicator light inside the button
9 - When the cooking cycle is complete, the indicator light turns off and the
10 - Remove the lid (L). Warning: it is very hot, handle it with care.
11 - Allow the Bowl (K) to cool for 1 or 2 minutes.
12 - Transfer the steamed food to the Blending Bowl (C). Remove the Liquid
13 - Replace the Blending Bowl (C) in the housing. Align and turn the Blending
14 - Replace the blending jug (C) on the food processor base (G). Align and
6 - Turn the Locking System (B)
clockwise to close and lock the
lid. The lid is closed properly
when the locking system is
snapped securely in its slot.
You will hear a click, indicating
CLEANING
that the Blending bowl is ready
to be used.
• Always unplug the appliance and ensure it is cool before cleaning.
• B-easy base (G): wipe the external surface and the inside of the Cooking Tank (H) with a damp cloth or sponge with mild liquid detergent. Rinse with water.
Let dry. Do not immerse in water or any other liquid. Do not wash or rinse under running water. Do not use abrasive products.
• The Liquid Collector (I), the Basket (J), the bowl (K), Steamer Cover (L), Blending Bowl Lid (A), Blending Bowl (C) can all be washed with a sponge and hot water
and a mild liquid detergent. Rinse with water and let dry. They can also be washed on the top rack of the dishwasher.
• Do not use abrasive sponges or cleaning solvents. They may damage the appliance and its surfaces
CLEANING THE BLENDER BLADES
For thorough cleaning, you can remove the blades from the blender by turning them to the «open padlock» symbol. They should then be washed by hand.
When replacing the blades, lock them into place by turning them to the «closed padlock» symbol.
REMOVING SCALE FROM THE HEATING TANK
After a certain time of use, mineral deposits may form on the inside surfaces of the Heating Tank (H) and damage the B-easy. You should regularly remove the scale
on your appliance by pouring 100 ml of hot water and 100 ml of white vinegar in the Heating Tank (H). Let sit for an hour or two (or longer if necessary). Pour out the
liquid and rinse with tap water several times. Do not immerse the B-easy in water. Wipe with a dry cloth or let dry.
WARNING:
8 - Pour the food into a dish.
Baby's meal is ready!
Be careful, it's hot!
power cord (M) are out of children's reach.
appliance in to the wall outlet.
water vessel (I) from the apparatus.
in the cooking guide (N) and in the table on page 3.
the bowl (K) or into the basket (J). You can use the basket (J) to cook different
foods separately. Put the first food items into the bottom of the main bowl (K),
and then insert the basket (J) with the other food items in it.
system, so avoid touching it when it is heating.
turns on, indicating that cooking has started. Warning: During cooking, the
Steamer Cover (K) may become very hot and steam will exit the hole on top
of the cover. Keep hands away to avoid burning yourself.
appliance turns off automatically.
Collector (I) using the handle and pour the cooking liquid in the Blending
Bowl (C), see page 5. This will add flavour and vitamins to baby's food.
Warning: The Liquid Collector (I) is hot. Handle with care. For better
cooking results, we recommend cooking cereals at the same time as
other foods.
Bowl (C) clockwise until it locks in the B-easy base (G).
turn the Blending Bowl Cover (A) clockwise, until it locks into place. The
lid is closed properly when the locking system is snapped securely in its
slot. You will hear a click, indicating that the Blending bowl is ready to be
used.You will not be able to blend anything until the lid is properly locked
into position.
If you unplug the food processor's power cord during a warming cycle, the cycle will resume when the product is plugged back in.
15 - Press the blending switch (E). Warning: Do not blend continuously,
but in short bursts of 5 seconds, to avoid overheating the motor.
Failure to follow the blending instructions above may cause the product
to stop working as a safety measure. If the appliance stops, please let
the product cool down for a few moments.
16 - When the food is ready, release the Blending Button (E) and blending will
stop.
17 - Unlock the Mixing Bowl Cover (A) and remove the Blending Bowl (C) from
the Base of the B-easy (G).
18 - You can now feed your baby the freshly prepared meal.
Warning: Always test food temperature before feeding baby.
Warning: Never blend without food or liquids in the Blending Bowl (C).
Allow the B-easy to cool for at least 15 minutes before using it to cook again.
REHEATING
1 - Place food to be reheated in a small glass or plastic jar able to withstand high
temperatures. Remove the lid of the jar.
2 - Place the small jar in the main bowl (K) and attach and close the lid (L).
3 - Depending on the quantity to be heated, put between 10 to 20mL of water
(2 to 4 teaspoons) into the cooking tank (H).
4 - Press the Cooking Button (F).
5 - When reheating is complete, the indicator light will turn off. Carefully remove
the jar to avoid burning yourself.
6 - Pour the food in a dish, stir the contents well to ensure an even temperature,
baby's meal is ready!
WARNING:
Always test food temperature before feeding baby.
THAWING
Follow the same instructions as for reheating.
• For a 120 ml jar, put 140 ml into the Cooking Tank (H) during about fifteen
minutes. Then, mix and wait a few minutes so that the jar cools down to the
right temperature.
• For a 240 ml jar, put 180ml into the Cooking Tank (H). Then, mix and wait a few
minutes so that the jar cools down to the right temperature.
13

Publicidad

Tabla de contenido
loading

Tabla de contenido