Information On The Machine; N Ame Plate; C Haracteristics Of The Machine - Cosmo PTP 180 Manual De Uso Y Mantenimiento

2.2.

INFORMATION ON THE MACHINE

The models introduced in this manual have been designed and made exclusively allowing the
distribution of solid, granular fertilizers and of seeds in the field. Their use is particularly indicated for
the gardening and for golf courses.
These machines are usually used during the day. If it is required the nocturnal use or with poor visibility,
it must use the lighting system of the tractor or of the equipment to which the machine is connected.
A different use, like the above mentioned one is considered improper. Any arbitrary modification made
to this machine relieve the manufacturer from any responsibility for damages or lesions, also serious,
that can be caused to the operators, to third parties or to things.
2.2.1. N
ame plate
On the hopper of every machine a name plate is fixed showing the model, the number of series and
the year of construction of the machine.
When some spare parts are required, it always necessary to refer to the type of machine, to the serial
number and to the manufacturing year.
Ubicación de la placa en la máquina
2.2.2. C
haraCteristiCs of the maChiNe
The hardiness of the steel welded frame, together with the remarkable life of the plastic hopper, lets
to obtain a highest quality level of the pull type spreaders.
The painting is made by an epoxy varnish with successive backing at 150°c with the application of the
primer bath, assuring a great protection and long life of the machine.
Centrifugal Spreader mod. PTP 7