Charging Your Headset - Sound ID 300 Guía De Inicio Rápido Y Manual Del Usuario

Redial*: To redial the last number called, quickly press the Main Button
twice.
Voice Dialing*: Simultaneously press and hold the Main and VPB buttons
for one second until you hear a beep. Your phone will then prompt you.
Re-establish Connection with the mobile phone: The Sound ID 300
will automatically attempt a re-connection with the mobile phone within
30 seconds of being disconnected. If the connection is not made it will
not attempt another re-connection. The following manual reconnection
method can be used:
1. Move the Sound ID 300 within the 30 feet range.
2. Do a short press on the main button of the Sound ID 300 to
reestablish connection.
* These are phone-specific features. In order to use them, you'll need to
verify that the phone supports and has them activated.

Charging Your Headset

It is important to charge your Sound ID 300 battery for a minimum of four
hours before you use the headset for the first time. Subsequent charges
take up to 2.5 hours for a full charge. When the headset is charging, the
light is red. When fully charged, it is green.
Note: To ensure a full first-time charge, please disregard the green
status light until at least four hours have passed.
12