NEVER LEAVE HEATER UNATTENDED WHILE CONNECTED TO A POWER
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
-
WARNING Fire, burn, inhalation, and explosion hazard. Never use the
heater in spaces which do or may contain volatile or airborne combustibles or
products such as gasoline, solvents, paint thinner, dust particles, or unknown
chemicals.
-
Gas cylinders not connected for use shall not be stored in proximity of this
or any other appliance.
-
Change gas cylinder according to the provided instructions.
-
Do not twist the gas supply hose.
-
Regularly check the gas hose and replace it as needed.
-
Only use the pressure regulator and hose supplied with the unit. Do not
connect the heater to an unregulated gas supply.
-
Use only the recommended types of fuel gases. Do not attempt to convert
to other gases.
-
Do not use the heater if damaged, defective or not fully assembled. Inspect
and check the heater before each use.
-
Do not attempt to repair, disassemble or modify the heater by yourself.
There are no user-serviceable parts inside. For service and repair always contact
an authorized service point.
-
The heater should be inspected at least annually by a qualified service
technician.
-
After use turn off the appliance at the gas cylinder valve.
-
Strictly follow all cleaning, maintenance and storage guidelines contained in
this manual. Never clean or maintain a heater when hot or operating.
© 2016, Obelis S.A Registered Address:
Bd.Général Wahis, 53
1030 Brussels, Belgium
BEFORE USING THE APPLIANCE.
3
SOURCE