Ebode BT Sound Guia Del Usuario página 5

Previous/Volume up
Next/Volume down
Turn off
Low battery warning
Charging
4. Pairing the BT Sound
To use your BT Sound, you must first pair it with a phone or a computer. Once your
Bluetooth® speaker is paired to a specific mobile phone, they will remain paired and
automatically recognize each other whenever they are within range.
Pairing the BT Sound to a smartphone:
Turn on your phone and ensure its Bluetooth® function is activated
-
Turn on the BT Sound and go to the paring mode.
-
Search your Bluetooth® devices on your phone by following the phone's instructions.
-
After a few second the phone will list the "ebode BT Sound" as a device. Select it and
-
follow your phone instruction to complete the connection.
If your phone requests a passkey or PIN, enter 0000.
-
Your phone will confirm the pairing, press Yes/Ok.
-
Finally, select to connect the BT Sound from your phone.
-
Pairing the BT Sound to a computer:
If your computer supports no Bluetooth® function, a Bluetooth® adapter is necessary.
-
Connect the adapter to your computer and ensure its Bluetooth® function is
activated.
Turn on the BT Sound and go to the paring mode.
-
Open the Bluetooth® software installed on your computer, and select "Search your
-
Bluetooth® devices" function. Refer to user manual of the Bluetooth® software for
more information.
After a few second the "ebode BT Sound" will be listed in Bluetooth® software of your
-
computer as a device. Select this icon and click the right button of your mouse to
select "pairing", then select " connect with audio device" with same operation.
5. Charging your BT Sound
The BT Sound is convenient to connect to an AC charger or a USB charger with Mini DC 2.0
port marked with "
before initial use. While charging, the red LED of the BT Sound is in solid red. When charging
is completed, the LED turns off.
Questions? Please visit our website
5-1-2012
Short press"
for next song.
Short press"
is for previous song.
Press the"
and all LED lights are off)
The LED flashes
Plug the charger to "
" Make sure that your BT Sound is fully charged for at least 6 hours
for FAQ and our contact details.
" is for volume up and long press "
" is for volume down and long press "
" button for 3 seconds. (a tone voice beep
" port of the device.(Red LED is on)
www.ebodeelectronics.eu
5
" is
"
ebode BTS30