TechniSat TechniVision 22 HD Guía Rápida De Funcionamiento página 13

5.4.1 Arrow selection method
> If is shown on the left and
the left/right arrow keys.
5.4.2 Selection list
If is shown on the right next to the set value, the value is changed using the selection list.
Press the OK button to open the selection list.
>
Highlight the setting you want using the up/down arrow keys.
>
By pressing the up/down arrow keys it is possible to move the highlight from
line to line and to move upwards and downwards page by page using the page
up/down buttons.
Confirm by pressing on the OK button. The selection list is closed again and the
>
selected setting is shown in the menu.
on the right next to the set value, you can alter this using
13
Basic operation