Panacom LP-8800 Manual Del Usurario página 17

Recording to computer using Audacity
- Start the record playing as described above, and press Record
at the top of the Audacity window to start recording to the
computer.
- Once recorded use the Transport controls at the top of the
screen to, Go to start, Play, Record, Pause, Stop and Go to end of
Wave form as below:
- Use the file, Edit, View, Project, Generate, Effect and Analyse
menus to Save, Export and Manipulate your music.
- If the recording level requires adjustment, click on 'START' ,
'SETTINGS' and select control panel. Under Control Panel select
'SOUNDS and AUDIO DEVICES' , click on the 'VOLUME' tab and
select 'ADVANCED' .
- On the Master volume window select options at the top left
hand corner, click on properties in the drop down menu.
- In the Properties window select "USB Audio Device " from
the drop down menu at the top. Click on "OK " to confirm the
selection and a window will now appear with a control for the
recording level. Move this control up if the recording is too quiet
and down if the recording is too loud
Pg. 17