Vasner Appino 20 Silver Manual Del Usuario página 20

VASNER
When the heater is used for the first time, it switches to the maximum
setting after 4 seconds. The LED that was previously blue is now red (7.).
5. Dimming: Using the arrow keys, you can dim the heater to increase and
decrease the intensity. Alternatively, the heater can also be dimmed by
pressing the reset button directly.
6. Max. power: If you want to quickly switch to the "Max. power" setting,
you can press the "Max" button and the heater will jump directly to the
maximum setting.
7. Switching off: Use the "Off" button to switch the heater off again.
The LED display switches from red back to blue. Then switch the "On/off
switch" to "0" to switch the heater off completely. For safety, we also
recommend unplugging the heater.
Caution:
If you switch the heater off using the remote control or app, it is still in standby
and is powered. By removing the batteries when you are not using the remote
control, you can increase the battery life.
20
Increasing the heat setting
Immediately setting the heater to maximum
Decreasing the heat setting
Switches the heater on.
The heater first switches on at 33%, "Gentle
start". After 4 seconds, it returns to the heat-
ing setting that was last selected. When the
heater is used for the first time, it switches to
the maximum setting after 4 seconds.
Switches the heater to standby mode
GB