GE 162D3941PO0 Manual Del Proprietário página 23

Insert the Panels
Carefully push the door panels into tile slots. Make sure that the top freezer
panel is put in _dth tile cutrout at tile upper left hand Colonel -. When inserting tile
flesh food panel make sure the cut-out is at tile upper right hand Colonel ".
Replace the Door Handle and Trim
Reinstall tile tull length handle and top handle cap. Loosely screw file handle
onto tile door. Place tile cap on tile lop of tile handle and loosely screw doom file
cap. Litl file handle up and lighten tile lop screwon tile handle. Then fighlen
tile handle cap screw so that tile cap and handle fit flush. Tighten all tile scre,,_s.
Tile flesh food panel is installed the same way.
3/4" (19 ram) or Raised Panel
A raised panel design screwed or glued to a 1/4" (6 ram) fllick backing, or a
3/4" (19 ram) toured board can be used. Tile raised portion of the panel umst
be iabricamd to permit clearances of at least 2" (51 mm) flom tile handle side
fbr fingertip clearance and 1*/_"(32 ram) fiom tile hinge side to avoid striking
ac!jacent cabinen T.
Weightlimitationsforcustom panels:
Ff_sh Food38 Ib,(17kg)max.
Freezer Door20Ib, (9kg)max.
1/4" (6 ram)
2" (51mm)
Clearance
HandleSide
Appearance Clearance
Panel
HingeSide
3/4"
(19ram)
Re[rigerator
Door
23