Alcad 905-ZA Guía Rápida De Programación página 2

QUICK PROGRAMMING GUIDE 905-ZA DOUBLE FILTER
Start/on
Main menu
Select series Transcodifi cador 912 QPSK - COFDM
NIT Table
Select series
905-ZA Programmable fi lter
912-TP Transmodulator QPSK-PAL
905-ZA Programmable fi lter
Confi gure module
Select the button
102, press T (transmit) to activate the programming mode. Press the PRG pushbutton of the
Model
ZA-411 Double fi lter
Program by
Channel
Channel
Frequency
Channel table
BG CCIR
Filter 1
Channels
21
Frequencies
474.00
Mode
Digital
Adjust level
+0.5
Filter 2
Channels
21
Frequencies
474.00
Mode
Digital
Adjust level
+0.5
Automatic level adjust
Select the button
and, while pointing at the PA-320 amplifi er or at the IP-
Programming On/Off
Switch off F1
21
474.00 MHz
dB
Switch off F2
21
474.00 MHz
dB
and, while pointing at the PA-320 amplifi er or at the IP-102,
Programming On/Off
press T to deactivate the programming mode.
Press the Power On key of the PS-011 to start up the
system.
OK
Choose Select Series to select the programming series.
Select the series: 905-ZA Programmable fi lter.
OK
To commence programming the module, select Confi gure
OK
module.
fi rst ZA.
OK+ +OK Select the ZA-411 Double Filter model.
Select the programming mode of the output of the module:
OK+ +OK
channel or frequency.
Select the standard for the output channel.
OK+ +OK
Press T (transmit) to deactivate the F1 fi lter.
T
If you are programming the output by channel, enter the
Keypad + T
or
fi rst and last channels. After confi rming with OK, press
OK+ +OK+T
T to transmit.
If you are programming the output by frequencies, enter
Keypad + T
the fi rst and last frequencies. Then press T to transmit.
Select Analogue mode for analogue channels or Digital
OK+ +OK+T
mode for digital channels. Then press T to transmit.
Select the output level from the list.
OK+ +OK+T
Press T (transmit) to deactivate the F2 fi lter.
T
Keypad + T
or
The same as fi lter 1
OK+ +OK+T
Keypad + T
The same as fi lter 1
OK+ +OK+T
The same as fi lter 1
OK+ +OK+T
The same as fi lter 1
Press the PRG pushbutton of the next ZA to be programmed and return to selecting
the model, using the cursor keys to repeat the process.
When all the modules have been programmed, move
T over the button for setting the levels automatically
and press T to transmit. No with IP-102.
ENG