Battery Installation - Metrologic Optimus PDA SP5700 Serie Guia De Inicio Rapido

MiniSD Card and SIM Card Installation
MiniSD Card Installation
Insert MiniSD Card with label facing upwards. To remove,
gently press the card into the socket to eject

Battery Installation

To install a battery, slide the battery cover lock to the open position. Remove the battery door and insert a new battery.
Replace the battery door ensuring the battery door lock is in the closed position.
Always ensure your PDA is switched off when changing batteries.
Pulling out Stylus Pen
• The Stylus pen is stored and removed
from the rear of your PDA
Optimus PDA SP5700series Quick Start Guide
Open the battery cover and remove the paper labeled
"UIM/SIM Card Slot Area" before inserting the SIM card.
SIM Card Installation
Adhering Protection Film
• Gently wipe the LCD with a soft cloth
before adding the protective film
• Start by adhering the film to one
corner of the LCD and apply film
across the LCD. Avoid trapping air
between the LCD and the film.