Marley Get Together Manual De Instrucciones página 2

Get Together
Portable Bluetooth Audio System
®
Greetings and Welcome to the House of Marley
We are honored you have selected Get Together to become part of your music experience. Get Together
is a portable stereo sound system which works with Bluetooth
hundreds of other devices via the auxiliary input. The system uses two high-output, long- throw 3.5"
(89mm) woofers in a ported enclosure, two 1" (25mm) tweeters and a powerful amplifier. The system
uses custom-milled bamboo front and rear sections and is wrapped in REWIND™ fabric composed of
reclaimed hemp, organic cotton, and recycled plastic bottles (RPET).
Everything You Need to Jam
The Get Together comes with the following items:
Sound System
Powering Your Get Together
Get Together includes a built-in rechargeable battery that is charged by the included power supply. The
LED by the power port will glow RED when the system is charging and turn off once the battery is full.
Using a Wall Outlet
1. Insert the AC power supply cord into the Get Together.
2. Insert wall plug into an appropriate wall outlet.
Connecting Your Music Device(s)
Pairing Mode (Flashing Blue LED)
Get Together automatically goes into reconnect mode for 5 seconds as soon as
you turn it on (flashing BLUE led). It then switches to auxiliary mode (RED led).
You can pair a new device to Get Together by holding the
Note: Holding the for 3 seconds will kick off the device currently connected to
Get Together and go into Pairing Mode.
Connected Mode (Solid Blue LED)
Use your Bluetooth-enabled device to pair to Get Together. Get Together does not require a pairing
password. Once paired, the LED will glow solid blue.
Note: Get Together will automatically pair with the last device connected to it when turned ON (when
possible).
EN
devices connected wirelessly and
®
AC Power Supply 3.5mm Stereo
(100-240 VAC) Mini Cable
(1)
for 3 seconds.
2
Connecting other devices
The auxiliary input on the back of Get Together allows you to
connect other audio devices to the system. Simply connect your
device to the AUX input on the Get Together using the 3.5mm
stereo mini cable (included).
Easy To Use
When the system is powered and a device is connected, you are ready to enjoy your Get Together.
1. Press the power button to turn Get Together on. Press the power button again to turn Get
Together off.
2. Increase or decrease the volume on Get Together by pressing or holding the – and + buttons until
the desired volume is reached. You can also adjust the system volume using the controls on your
music source.
3. Quickly press the while music is playing to pause and resume playback directly from Get Together.
(1)
Charging Your Device
A convenient USB port is available on the back of Get Together to charge your devices while it is on. Use
the cable that came with your device to charge.
NOTE: Not all devices are compatible with the USB port. If your device does not charge, use the power
adapter that came with it.
Battery Replacement
(2)
Your Get Together includes a rechargeable battery designed to last the lifetime of the product. In the
unlikely event that you should require a replacement battery please contact Customer Services who will
supply details of the warranty and out-of-warranty replacement battery service.
Important Safety Information
1. Follow and keep these instructions.
2. Heed all warnings.
3. Do not use this apparatus near water.
4. Clean only with a dry cloth.
5. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
7. Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles, and
the point where they exit from the apparatus.
8. Only use attachments/accessories specified by the manufacturer.
(2)
3
(3)
EN