How To Use The Printserver - Cisco Linksys WPSM54G Guía De Instalación Rápida

WPSM54G
3
How to Use the PrintServer
This section explains how to use the PrintSever through its utility.
Printing
Any time you start a print job, your computer will automatically connect to
the printer. You do not need to perform any additional steps.
Scanning, Faxing, or Reading Information from a Memory Card
To scan, fax, or read information from a memory card using the software
that came with your multifunction printer (if you have one), use the
PrintServer Utility to connect the computer to the printer.
NOTE:
memory card, you must follow these instructions.
Follow these instructions:
A.
Right-click the PrintServer
icon in the system tray of your
desktop.
B.
A menu will appear. Click
Connect.
C.
When the icon with waves is
displayed, the computer is
connected to the printer.
You can now scan, fax, or read
information from a memory
card inserted into the printer.
Wireless-G PrintServer
Each time you scan, fax, or read information from a
English : How to Use the PrintServer
Icon Showing Availability Status
Click Connect
Icon Showing Connected Status
17