Publicidad
Idiomas disponibles
Idiomas disponibles
Restarting the WIFI module:
Restarting the WIFI module will often clear up any
connectivity issues you may be having and is an
extremely easy process.
1. Connect the WIFI module to a power source – this
can be either a charged BAT-200 or directly to your
computer using the USB to micro USB cable.
2. The LED lights on the WIFI module will turn on to
indicate that it is now being powered.
Note: You do NOT need to wait for the network to be
transmitted at this point.
3. Once the WIFI module is powered, simply press and
hold the button on the front panel of the WIFI module
for roughly 4 seconds (until the green, red, and blue
turn on).
4. When the blue LED is the only light on, the closed
wireless network is being transmitted and you can
connect devices as usual.
5. If the behavior of the WIFI module is still sporadic
please continue to the Updating the WIFI module's
firmware walkthrough below.
V2018.01
27
Home
English
Publicidad
