Adjusting Source Levels; Using The Dynamic Range Control; Using The Down-Mix Function - Pioneer DEQ-P6600 Manual De Operación

Section
03 Digital Signal Processor
LEFT:25  RIGHT:25 is displayed as the left/
right speaker balance moves from left to
right.

Adjusting source levels

SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
! Settings are based on the FM tuner volume
level, which remains unchanged.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2 Touch A.MENU and DSP and then touch
SLA.
3 Touch a or b to adjust the source vo-
lume.
Each time you touch a or b it increases or de-
creases the source volume.
SLA +4  SLA 4 is displayed as the source vo-
lume is increased or decreased.
Notes
! The MW/LW tuner volume level can also be
adjusted with source level adjustments.
! Video CD, CD and MP3/WMA are set to the
same source level adjustment volume auto-
matically.
! DVD and the optional DVD player are set to
the same source level adjustment volume
automatically.
! External unit 1 and external unit 2 are set to
the same source level adjustment volume
automatically.
! AUX (auxiliary input) and AV (video input) are
set to the same source level adjustment vo-
lume automatically.
8
En
Using the dynamic range
control
The dynamic range refers to the difference be-
tween the largest and softest sounds. The dy-
namic range control compresses this
difference so that you can clearly hear sounds
even at low volume levels.
! The dynamic range control is effective only
on Dolby Digital sounds.
! When playing other than the DVD disc, you
cannot switch to D.R.C.
1 Touch A.MENU and DSP and then touch
D.R.C.
2 Touch a to turn the dynamic range con-
trol on.
# To turn dynamic range control off, touch b.

Using the down-mix function

This function cannot be operated when DVH-
P7000R, DVH-P5000MP or AVH-P6500DVD is
connected to this unit.
The down-mix function allows you to play back
multi-channel audio in 2 channels.
1 Touch A.MENU and DSP and then touch
DOWN MIX.
2 Touch or to switch the setting.
! Lt/Rt  Down mix so that the surround
components can be restored (decoded).
! Lo/Ro  Stereo mix the original audio that
do not contain channel modes such as sur-
round components.