Installation Options; Mounting Bracket To Cabinet Wall - GE SmartWater GX1S01C Instrucciones De Instalación

CAUTION:
For connection to cold water
line only.
Option 1: For connection to primary sink faucet
NOTE: For use with filter element FXUTC ONLY.
Use of other filter elements could adversely affect
main faucet flow rate.
Required Tool Kit (sold separately)
I Installation Kit – SSKIT(full instructions included
with kit)
I Sump Wrench – UCWRNCH (recommended)
1. Shut off cold water supply.
2. Cut out a 3" section of pipe.
3. Make connections as shown.
4. Fully open faucet and turn to cold.
5. Slowly turn on cold water and check for leaks.
6. Close faucet when water flow is smooth.
Option 2: For connection to secondary filtered water faucet
NOTE: For use with FXUTC or FXULC (rev. 2) filter elements.
Required Tool Kit (sold separately)
I Installation Kit – SSKIT (full instructions
included with kit)
I Faucet – UCFCTBL or UCFCTWW
I Sump Wrench – UCWRNCH (recommended)
1. Shut off cold water supply.
2. Make connections as shown.
3. Fully open filtered water faucet.
4. Slowly turn on water supply valve and check
for leaks.
5. Close faucet when water flow is smooth.
NOTE: Installation kit (SSKIT), sump
wrench (UCWRNCH) and faucet
(UNFCTBL or UNFCTWW) are sold
separately for model GX1S01C.

INSTALLATION OPTIONS

Sink
Hot Cold

MOUNTING BRACKET TO CABINET WALL

The bracket can be used as a
template for marking the location
of the mounting screws. When
determining the location of the
bracket, make sure you leave 1
to 2" of free area under the sumps
to allow for sump removal and
enough space on either side to
make the tubing connections.
2
To main faucet
Cold water line
Filtered
water faucet
Tubing
Water supply valve
Insert
Nut
Tubing
2-3/4"
"
1 ⁄
2
Mounting
bracket
Inlet
Sump
Water supply
valve
Washer
Adapter
Nut
Water out
Water in
1-1⁄2 " to 2"
Mounting
screw (2)
Outlet
Mounting
screws