Termozeta Natural Juice 1000 Libro De Instrucciones página 12

ENGLISH
- Lift the lid (3) by grasping its opening (2).
- Extract the filter (4) by pulling it towards yourself and then remove
the collector (5).
- At this point it is possible to remove also the juice collector (12)
easily.
ASSEMBLY
To assemble the appliance, carry out the operations described in the
previous paragraph in the reverse order.
INSTRUCTIONS FOR USE
- Lay the appliance on a stable and flat surface.
- Unwind the feeding cable completely and make sure that all the
components are correctly assembled on the motor unit, that
the lid (3) is correctly placed and that the two locking handles
(9) are closed.
At this point, connect the plug to the power outlet.
- Never leave the feeding cable dangling from the base plane
where the appliance is positioned.
WARNING!
The appliance is provided with a double safety system preventing
operation if the two locking handles (9) are positioned incorrectly,
since they ensure the correct closure of the lid (3).
- Start the juice extraction by rotating the selector (11) to the
position: "1" (low speed) for softer and more juicy fruits/
vegetables such as melons, peaches, grapes, etc.; "2" (high
speed) for harder and less juicy fruits/vegetables such as carrots,
apples, etc.
- Insert the fruits or the vegetables (see paragraph "SUGGESTIONS
FOR USE") in the opening (2) of the lid (3), only after starting the
appliance. Fruits and vegetables can be continuously added
during operation. Push the fruits or the vegetables towards the
filter (4) by using the pusher (1) only.