GE 22 Manual Del Propietario E Instalación página 23

Installation Instructions
J_ PUT THE REFRIGERATOR IN PLACE
Hove the refrigerator to its final location
[] LEVEL THE REFRIGERATOR
The refrigerator can be leveled bg adjusting
the rollers located near the bottom hinges
Raise
"_. Rollers
Rollers have three purposes:
. Rollers adjust so the door closes easilg when
opened about halfwag (Raise the front about
5/8" [16 mm] from the floor,)
° Rollers adjust so the refrigerator is firmly
positioned on the floor and does not wobble
• Rollers allow you to move the refrigerator
away from the wall for cleaning
To adjust the rollers:
° Turn the roller
adjusting screws
clockwise to raise
the refrigerator,
counterclockwise
to lower it Use a
3/8" hex socket or
wrench, or an
adjustable wrench
\
Roller adjusting screw
j_ LEVEL THE DOORS
%
@
Adjust the refrigerator door to make the doors
even at the top
To align:
Using a 7/16" wrench, turn the door adjusting
screw to the right to raise the door, to the left
to lower it
NOTE:
A nylon plug, imbedded in the threads
of the pin, prevents the pin from turning unless
a wrench is used
After one or two turns of the wrench, open
and close the refrigerator door and check
the alignment at the top of the doors
,_ Doors should be even at top
23