Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATIONS (Continued)
When you select the rating category and turn it [BLOCK], the higher rating will turn [BLOCK]
●
automatically. Also, the lower rating will turn [VIEW] automatically.
When you turn "G" to [BLOCK] or [VIEW], the all ratings will turn to [BLOCK] or [VIEW]
●
automatically.
When you turn "X" to [VIEW], the all ratings will turn to [VIEW] automatically.
●
6) Press the MENU button to exit the menu.
[TV RATING SET UP]
1) Press the MENU button so that the menu display appears on the TV
screen.
2) Press the CH(annel) ▲ or ▼ button to point to "V-CHIP SET UP".
Then, press the VOL(ume) ▲ button.
3) Use the number buttons to enter 4-digit access code. The default access
code is 0000. If you have not set up your personal access code, you should
use 0000.
4) Press the CH(annel) ▲ or ▼ button to point to "TV RATING".
Then, press the VOL(ume) ▲ button.
5) Press the CH(annel) ▲ or ▼ button to point to your desired item.
Then, press the VOL(ume) ▲ button to select [BLOCK] or [VIEW].
<Selection> <Rating Category Explanations>
• TV-Y:
Appropriate for all children
• TV-Y7:
Appropriate for children seven and older
• TV-G:
General Audience
• TV-PG:
Parental Guidance suggested.
• TV-14:
Unsuitable for children under 14
• TV-MA:
Mature audience only
When you select the rating category and turn it [BLOCK], the higher rating
●
will turn [BLOCK] automatically. Also, the lower rating will turn [VIEW]
automatically.
When you turn "TV-Y" to [BLOCK] or [VIEW], the all ratings will turn to [BLOCK] or
●
[VIEW] automatically.
When you turn "TV-MA" to [VIEW], the all ratings will turn to [VIEW] automatically.
●
V-CHIP SET UP SUB RATINGS
●
When you select TV-Y7, TV-PG, TV-14, or TV-MA and you press the VOL(ume) ▲ button, the
sub-ratings will appear on the TV screen.
If you select the rating category (example: TV-PG) and turn it [BLOCK] or [VIEW], the sub-rat-
ings (example: V for Violence) will turn [BLOCK] or [VIEW] automatically.
You can set the sub-ratings to [BLOCK] or [VIEW] individually when the rating category is set to
[BLOCK]. To set the sub-ratings individually, follow the steps below.
TROUBLESHOOTING GUIDE
Sometimes a performance problem can be easily solved by checking seemingly apparent but often over-
looked possibilities. Before arranging for service, check these items. It could save your time and money.
QUICK SERVICE CHECK LIST
POSSIBLE REMEDY
Try a new channel, if OK, then possible station trouble.
Is TV plugged in?
Power at outlet?
Is TV's POWER button on?
Is antenna connected to terminal on the back of the set?
If outside antenna is being used, check for broken wire.
Check for local interference.
Turn off with POWER button and then turn it on after about a minute.
Adjust COLOR control.
Adjust CONTRAST & BRIGHT control.
Check batteries in Remote Control.
Move the TV away from the nearby appliances which have Magnetism.
19" model: Turn off using the power button, then turn it on again 30 minutes or so later.
13" model: Unplug the TV power cord, then plug it in again 30 minutes or so later.
Closed Caption Problem
My TV is showing captions that are
misspelled.
My TV will not show the text in its entirety
or there is a delay of what is being said.
My captions are scrambled with white
boxes on the TV screen.
My program guide listed a TV show as
being closed captioned
but none of the captions were displayed.
My prerecorded videotape does not show
any captions. The tape box mentions it
being closed captioned.
My TV screen shows a black box on certain
channels.
Possible Remedy
You are watching a live broadcast and spelling errors made by the
closed captioning production company may pass through uncorrect-
ed. A prerecorded program will not show any misspelled words
because of the normal time available for editing the captions.
Captions that are delayed a few seconds behind the actual dialogue
are common for live broadcasts. Most captioning production compa-
nies can display a dialogue to a maximum of 220 words per minute.
If a dialogue exceeds that rate, selective editing is used to insure that
the captions remain up-to-date with the current TV screen dialogue.
Interference caused by building, power lines, thunderstorms, etc.
may cause scrambled or incomplete captions to appear.
Broadcasters may at times use a time compression process to the
actual program so that additional advertising time can be given.
Since the decoder cannot read the compressed information, captions
will be lost.
The videotape was either an illegal copying or the tape duplicating
company accidentally left out the captioning signals during the
copying process.
You are in the TEXT mode. Select CAPTION mode or CAPTION
[OFF].
When you select [TV-Y7]:
●
Press the CH(annel) ▲ or ▼ button to select "FV" (Fantasy Violence).
Then, press the VOL(ume) ▲ button to select [BLOCK] or [VIEW].
When you select [TV-PG], [TV-14] or [TV-MA]:
●
Press the CH(annel) ▲ or ▼ button to select "D"(Suggestive Dialog),
"L"(Coarse Language), "S"(Sexual Situation), or "V"(Violence). Then, press
PICTURE
the VOL(ume) ▲ button to select [BLOCK] or [VIEW].
CHANNEL SET
Note: When you select [TV-MA], "D" does not appear on the TV screen.
[ENGLISH] ESPAÑOL
V-CHIP SET UP
The sub-ratings which set to [BLOCK] appears next to the rating category
●
CAPTION [OFF]
in the TV RATING menu.
6) Press the MENU button to exit the menu.
ACCESS CODE
_ _ _ _
[V-CHIP ACCESS CODE]
To change access code, follow steps.
1) Press the MENU button, then press the CH(annel) ▲ or ▼ button to select
TV RATING
V-CHIP SET UP. Press the VOL(ume) ▲ button to continue.
MPAA RATING
2) Press the number buttons to enter your old access code. If you have never
CHANGE CODE
set up your personal access code, use 0000.
3) Press the CH(annel) ▲ or ▼ button to select CHANGE CODE. Then,
press the VOL(ume) ▲ button to continue.
TV-Y
[VIEW]
4) Use the number buttons to enter your desired access code in the NEW
TV-Y7 (
) [VIEW]
CODE space. Then, enter the same code in the CONFIRM CODE space.
TV-G
[VIEW]
TV-PG (
) [VIEW]
Your new access code is set. You will return to the "V-CHIP SET UP".
TV-14 (
) [VIEW]
If the code in the CONFIRM CODE space does not match the code in the
TV-MA (
) [VIEW]
NEW CODE space, repeat step 4, making sure you enter the same new code
exactly in the CONFIRM CODE space.
Notes:
• If a power failure occurs, the default code, 0000, will be the active access
code again.
• If you connect the power cord to an AC outlet that is controlled by a wall
switch, your personal access code will be erased every time you turn off the
power at the wall switch. The default code will be the active code again.
[IF YOU FORGET YOUR ACCESS CODE]
You should restore the access code to default code, 0000. To restore 0000 as your personal access
code, unplug the TV's power cord for 10 seconds, then plug it in again.
MAINTENANCE
CABINET CLEANING
Wipe the front panel and other exterior sur-
●
faces of the TV with a soft cloth immersed
in lukewarm water and wrung dry.
Never use a solvent or alcohol. Do not spray
●
insecticide liquid near the TV. Such chemi-
cals may cause damage and discoloration to
the exposed surfaces.
SUPPLIED ACCESSORIES
Remote control unit
(N0139UD or N0138UD)
Batteries ("AA" x 2)
SPECIFICATIONS
GENERAL SPECIFICATIONS
Television system:
Closed Caption
System:
Channel coverage
VHF:
UHF:
CATV:
Tuning System
Channel access:
Terminals
Antenna input:
Video input:
Audio input:
Earphone:
ELECTRICAL SPECIFICATIONS
Sound output:
PICTURE TUBE CLEANING
Wipe the picture tube of the TV with a soft
cloth. Before cleaning the picture tube, discon-
nect the power cord.
Rod Antenna
[13" model only supplied
19" model not supplied]
(0EMN00673 or 0EMN01599)
OTHER SPECIFICATIONS
NTSC-M
Remote control:
TV Standard
Operating
§15.119/FCC
temperature:
2 ~ 13
Power requirements: AC120V, 60Hz
14 ~ 69
[ 13" model ]
2 ~ 13, A ~ W,
Power consumption
W+1 ~ W+84,
(Maximum):
A-5 ~ A-1, 5A
Picture tube:
181 channel
Dimensions:
frequency synthesized
tuning system
Direct access keyboard,
Weight:
programmable
[ 19" model ]
scan and up/down
Power consumption
(Maximum):
VHF/UHF/CATV
75 ohm unbalanced
Picture tube:
(F-type)
Dimensions:
RCA connector x 1
RCA connector x 1
1/8" monaural (3.5mm)
Weight:
•Designs and specifications are subject to
change without notice and without our
legal obligation.
1W, 8 ohm
•If there is a discrepancy between languages,
the default language will be English.
TV-Y7
[BLOCK]
FV
[BLOCK]
TV-PG
[BLOCK]
D
[BLOCK]
L
[BLOCK]
S
[BLOCK]
V
[BLOCK]
TV-Y
[VIEW]
TV-Y7 (
) [VIEW]
TV-G
[BLOCK]
TV-PG (DLSV) [BLOCK]
TV-14 (DLSV) [BLOCK]
TV-MA ( LSV) [BLOCK]
PICTURE
CHANNEL SET
[ENGLISH] ESPAÑOL
V-CHIP SET UP
CAPTION [OFF]
ACCESS CODE
_ _ _ _
TV RATING
MPAA RATING
CHANGE CODE
NEW CODE
_ _ _ _
COMFIRM CODE
_ _ _ _
Owner's Manual
(OEMN02346)
Owner's
Manual
Digital encoded
infrared light system
5°C to 40°C
(41°F~104°F)
53W
13"
H : 12-3/4"(323mm)
W: 14-1/8"(358mm)
D : 14-4/9"(367mm)
19.0 lbs.
(8.5kg)
72W
19"
H : 16-3/4"(428mm)
W: 18-3/4"(475mm)
D : 18"
(454mm)
37.5 lbs.
(17kg)
Publicidad
Tabla de contenido
