Samsung SSG-5100GB Guía De Usuario página 2

‹ Pairing steps
1. Turn on the TV, and then move the glasses within 19.5 inches of the TV.
2. Press the power button on the 3D glasses briefly. The 3D glasses will power on and
pairing will start.
3. The message "3D glasses are connected to TV." will be displayed on the TV screen
when the pairing is successfully completed.
✎ If the pairing failed, the 3D glasses will power off.
✎ If the first attempt to pair fails, power the TV off and on again and perform step 2.
✎ How to pair again: Press the power button on the 3D glasses for more than 1
seconds.
<Pairing is needed again in the following situations:>
– If the 3D glasses do not function, even when the power button is pressed, especially
with a 3D TV after a repair.
– If you want to play 3D content on another Samsung 3D TV model that belongs to the D,
E, or F series released in 2011 through 2013.
English-2
[NA]SSG-5100GB-00L17.indb 2
‹ Replacing the Batteries
If the red LED blinks every two seconds continually, replace the battery with a new one.
1 2
Pull the battery cover Open the battery cover
downward
4 5
Replace the battery Push the battery cover
downward
✎ Insert the "+" side of the battery into the side marked with "+" in the battery compartment.
✎ To check the remaining battery capacity, refer to the pairing section in this manual.
3
Remove the battery
6
Close the battery cover
2013-01-02 8:44:54