3. Maintenance
No routine maintenance is required beyond the cleaning routine outlined in 2.
However:-
If the liquid is not cold enough:
Check the power supply is on, and fuse is not blown.
Check thermostat is correctly adjusted.
If the liquid is too cold:
Check thermostat setting.
If the lights do not operate (illuminated machine only):
Check power supply.
Is light switched on.
Note: Light bulbs and starters may be replaced in the usual manner. Remove
the fascia panel first then twist the component to remove from the socket.
Warning:
Ensure the machine is disconnected from the mains supply before replacing
lights. If in doubt consult a qualified electrician.
4. Defrosting:
In the event of the machine being incorrectly operated causing a build up of
frost on the interior panels:
Turn off machine.
Wipe inside of the machine with an absorbent cloth and dry.
Ensure the correct pack is used and ensure the door is secured.
Switch on machine.
04