Bartscher 601182 Manual De Instrucciones página 12

Further assembly
5) Attach the plastic snap-fit joints for the next shelf
at the desired height. Slide the shelf down from
above over the posts onto the plastic snap-fit
joints and press it down firmly again.
6) Repeat step 5) for the other shelves.
7) To adjust the height (levelling) of the rack, rotate
the feet on the bottom parts of the posts in and
out.
Now, the rack has been completely assembled.
Note:
a rubber hammer can make the assembly much easier.
Cleaning
•
Clean the rack regularly with a soft, moist cloth and wipe it thoroughly afterwards.
CAUTION!
Never use corrosive or abrasive cleaning agents which may damage the
chromed surface of the rack.
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
- 8 -
phone: +49 (0) 5258 971-0
fax: +49 (0) 5258 971-120