Bartscher TS 301 Manual De Instrucciones página 11

Assembly
1. Start the assembly of the serving / transport
trolley from fixing the shelves to the frame.
Insert the mounting angles inside the corners
of the frame. Screw them tight with the use of
an Allan wrench and the wrench and the
included hexagon socket screws and the nut.
2. Lay the serving / transport trolley on its
side and attach castor buffers to the
frame. Finally, next, screw 4 swivel
castors into the frame.
3. Carefully place the serving / transport trolley on the floor and make sure that all
swivel castors touch the surface. The serving / transport trolley may be aligned by
adjusting swivel castors. Secure their position with lock nuts.
NOTE!
Remove the protective foil after the assembly!
4. When the serving / transport trolley is in the desired location, block the swivel castors
with brakes, to prevent it from being accidentally moved or tipped.
Mounting angle
Hexagon socket screw
Nut
Castor buffer
- 7 -