To Set The Print Activation; To Set The Print Justification - Simplex 100 Guía Del Usario

P
ROGRAMMING

To Set the Print Activation

The Simplex 100 has four settings for print activation: MANUAL, AUTOMATIC,
COMBINATION, and EITHER. Refer to the Operation section of this publication for more
information on these different print activation methods.
A. Press CHANGE once.
B. Press ACCEPT until the programming arrow appears above PRINT ACTIVATION.
C.
Press CHANGE once.
•
The PRINT ACTIVATION option begins to blink.
Press CHANGE until the desired option number is displayed.
D. Press ACCEPT to set the PRINT ACTIVATION option shown on the display.
•
The programming arrow moves to the next option (go to Step C of To Set the Print
Justification).

To Set the Print Justification

Print justification defines the location of printed information to be set to the front or back of the 20
character print field. When printing less than 20 characters, select the Front setting.
A. Press CHANGE once.
B. Press ACCEPT until the programming arrow appears above PRINT JUSTIFICATION.
C.
Press CHANGE once.
•
The PRINT JUSTIFICATION option begins to blink.
Press the CHANGE button until the desired number is displayed.
D. Press ACCEPT to set the PRINT JUSTIFICATION option shown on the display.
•
The programming arrow moves to the next option (go to Step C of To Set the Display
Orientation).
Note: Make a sample print to ensure that the setting you've selected is right for your printing
needs.
20