MetalTech 6'BAKER JOBSITE Serie Directivas De Seguridad E Instrucciones De Montaje página 3

MAX
ASSEMBLY INSTRUCTIONS
Insert casters in side frame's lower extremity. Secure casters with locking pins.
1
Lock the casters by firmly depressing the top tab of the caster.
2 While maintaining the brace locking mechanism pulled, insert the braces onto
the frame sides at desired height.
Ensure that the locking stems are properly engaged in side frames.
3
Secure the brace using the locking pins.
4
Install the platform on the braces.
5
6 Turn the platform security latches toward the inside.
2
4
MAXIMUM CLIMBING DISTANCE
Maximum distance to keep from the side frame in order to safely climb a mobile scaffold unit.
The loading condition considered in this table is only the scaffold's self-weight.
TOTAL WEIGHT
ONE UNIT HIGH
(WORKER +
TOOLS)
Distance is measured from the farthest body part to the ladder**
150 lb
19.74 in.
160 lb 18.51 in.
170 lb
17.42 in.
180 lb
16.45 in.
190 lb
15.59 in.
200 lb 14.81 in.
210 lb 14.1 in.
220 lb 13.46 in.
230 lb 12.88 in.
1
TWO UNITS HIGH OR MORE*
28.98 in.
27.17 in.
25.57 in.
24.15 in.
22.88 in.
21.73 in.
20.7 in.
19.76 in.
18.9 in.
6
* The counterweight provided by the
guardrail system and outriggers is not
considered in this calculation.
** No part of the body should extend
farther than the distance mentioned.
5
3
BOX CONTENTS
QTY. PART CODE DESCRIPTION
2 I-CISCH1001 Side frames
I-CISB Braces
2
1 I-CISCH1003 Antislip platform with trap door
I-C1CAS5 Casters
4
8 I-CAS5PIN Locking pins
3
ENGLISH