Flatbed Drawer - imacon Flextight Progression Guía De Usuario

Flatbed Drawer

C
Figure 2: Flatbed drawer features
A Flatbed Working Light: provides light for use when positioning
your originals on the ßatbed.
B Electrostatic Plate: holds thin reßective originals in place. Remove
this plate to scan thick reßectives or a large number of transparan-
cies.
Electrostatic Plate Door: swing this door down to place or remove
C
the electrostatic plate.
D Drawer Support Handle: To use the ßatbed, grab this handle and
pull the drawer support all the way out. Then press the drawer
button to open the ßatbed (see ÒFront Panel and Drum LoaderÓ on
page 8).
E Electrostatic Field Button and Light: The button switches the elec-
trostatic Þeld on and off. The light turns on to indicate when you
have activated the electrostatic Þeld.
F Lift Point: A gap behind the front plate on both sides of the drawer
enables you to insert your index Þngers to swing down the electro-
static plate door or lift the top glass plate.
Imacon Flextight Progression UserÕs Guide
Hardware ReferenceÑFlextight Progression
A
B
D E
Flatbed Drawer
F
9