Eos Wireless converge Serie Manual Del Utilizador página 3

Introduction
Eos loudspeakers are designed to deliver natural and accurate music reproduction. Eos loud-
speakers are acoustically matched to obtain the best sound from your Eos Converge Amplified
Receiver. To achieve the best sound from your Eos loudspeakers, please take a moment to read
the instructions contained in this setup guide.
Speaker Placement
For best stereo imaging, the left and right speakers should be the same distance from their
respective side walls. To reduce bass, it is best to place the speaker at least 12" (.3M) from the
wall behind the speaker. It also is best for the speakers to be placed at an equal distance from
the listening position
Note: Eos loudspeakers are magnetically shielded to allow them to be placed near a television
or computer monitor. If you notice any discoloration or distortion of the television or monitor's
display, move the speakers away from the device.
Speaker Wire Connection
When making connections, ensure that none of the strands of speaker wire come in contact
with an adjoining speaker terminal.
1. Use your fingers loosen the screw terminal to reveal the connection hole.
2. Insert the stripped end of the gold colored wire to the speaker terminal hole marked
"+" then tighten the screw terminal. Insert the stripped end of silver colored wire to
the terminal hole marked "-" then tighten the screw terminal. The stripped portion
should be caught firmly in the connector post.
3. Repeat this procedure to setup the second loudspeaker.
Eos Loudspeaker Connection
3