Gibbon GB 13840 El Manual página 6

Additional information for the Surfer Line
6a
Ratchet and Andy Lewis Trickline:
Please thread the slackline into the ratchet
slot from the above when the ratchet facing
upside down as indicated on the ratchet with
an arrow. Please refer to Image 6a.
7
Pull the band through the axle until the band
is taut (i.e., there is no slack in the band) ("D"
in Image 7).
D
8
Once the band is taut through the axle, use
one hand to hold both sides of the band to-
gether ("E" in Image 8 & 9).
Begin tightening the ratchet. ("F" in Image 9)
9
GIBBON MANUAL - ENGLISH