User Interface - AVM Fritz!!Powerline 546E Instalación Y Operación

Connecting Wireless LAN and Network Devices
With your wireless and network devices you can use FRITZ!Powerline 546E as an
access point to your home network and your Internet router.
This is how to connect your wireless LAN devices, like smartphones or laptops, which
support the fast connection method WPS, with FRITZ!Powerline 546:
1. Press the WLAN button on FRITZ!Powerline 546E until it starts fl ashing.
2. Now start WPS on your wireless LAN device within two minutes.
If your wireless LAN device does not support the quick connection method WPS:
1. Remove FRITZ!Powerline 546E from the outlet
and take note of the WLAN key printed on the
back of the device.
2. Start the WLAN software on your wireless LAN
device and enter the WLAN key there.
If you would like to use a wired network device:
 Connect your network device to one of the LAN
jacks on FRITZ!Powerline 546E using a LAN cable.
Uber Powerline anschließen
FRITZ!Powerline 546E kann Netzwerkgeräte auch über
Powerline in das Heimnetz einbinden. Die Netzwerkge-
räte sind dann über die Stromleitung mit FRITZ!Powerline
546E verbunden.
22
FRITZ!Powerline 546E
Powerline Device Password:
ABCD -EFGH-IJKL-MNOP
WLAN Network Key
(WPA2/WPA):
3779 8981 1562 8981 1234
Powerline bc : 05: 43 : 0e: f 9 : 31
MAC/AIN:
Button Assignments:
On/Off • briefly: socket on/off
WLAN • briefly: WLAN on/off • long: starting WPS
Powerline • briefly: Powerline an/aus • long: register
C031.452.00.000.001
Serial-No.:
.: 2000 2573
Part-No
230 V~; 50 Hz; Max. 10A
© AVM GmbH • www.avm.de
These values are examples. Do not
adopt these values in your settings.

User Interface

Open the FRITZ!Powerline 546E user interface in your web browser by entering
 fritz.powerline, if FRITZ!Powerline 546E is connected with a FRITZ!Box.
 192.168.178.2, if FRITZ!Powerline 546E is
 the
<IP address>. The IP address is assigned by your web router as soon as any
FRITZ!Powerline 546E devices are included in your home network.
In the user interface you can, for instance, confi gure settings for the smart plug,
switch the LED buttons on and off , change the operating mode, or perform a FRITZ!OS
fi rmware update.
Expanding an Ethernet Home Network
Here is how to use FRITZ!Powerline 546E as a LAN bridge in your Ethernet home
network.
1. Start a web browser and enter fritz.powerline
erline 546E user interface opens.
2. Open System/Operating Mode and click Change Operating Mode.
3. Select LAN Bridge and click Next. A Wizard starts to guide you through the confi g-
uration process.
4. Click Finish.
5. Connect your wireless LAN and network devices with FRITZ!Powerline 546E.
not connected with a router yet.
in the address line. The FRITZ!Pow-
23