Alcad 912-MS Guía Rápida De Programación página 2

QUICK PROGRAMMING GUIDE 912-MS
Main menu
Transcodifi cador 912 QPSK - COFDM
Select series
NIT table
Select series
912-TT Transmodulator 912 QPSK - COFDM
912-MS Modulators
912-MS Modulators
Confi gure module
Set the programming switch of the 912-MS module to the ON position. The programming
Program by
Channel
Channel
Frequency
Standard
BG CCIR
Channel
S7
or
Frequency
149.50
V/A ratio
12
12
16
Audio
Mono
Mono
Stereo
Dual
Audio level
1
Video level
3
Set the programming switch of the 912-MS module to the OFF position. The programming indi-
indicator light will now come on and stay on.
OK+
OK+
Keypad + T
OK+
MHz
Keypad + T
Keypad + T
dB
OK+
OK+
Keypad + T
dB
OK+
Keypad + T
dB
OK+
cator light will go out.
Press the Power On key of the PS-011 to start up the
system.
Choose Select Series to select the products series.
OK
Select the series: 912-MS Modulators.
OK
To commence programming the module, select Confi gure
OK
module.
Select the programming mode of the output of the
+OK+T
module: channel or frequency. Then press T to transmit.
Select the standard for the output channel. Then press T
+OK+T
to transmit.
If the output is being programmed by channel, you can
enter the channel either by using the numeric keypad or
or
by selecting a channel from the pull-down list. Once you
+OK+T
have confi rmed your selection by pressing OK, press T
to transmit.
If you are programming the output by frequency, enter
the frequency using the numeric keypad. Then press T
to transmit.
Select the video/audio ratio in dB from the available
or
options. Then press T to transmit.
+OK+T
Select the input audio. Then press T to transmit.
+OK+T
or
Set the audio level. Then press T to transmit.
+OK+T
Set the depth of modulation so that the image is neither
or
too bright nor too dark. Then press T to transmit.
+OK+T
ENG