Usb Card Reader/Writer Mode - SanDisk Photo Album Guia Del Usuario

• MARK FOR PRINTING – When selecting YES, the photo is marked for printing. If the card
with marked photos is inserted in a printer or photo kiosk that is DPOF compatible, the
printer/kiosk is automatically instructed which photos to print.
• NUMBER OF PRINTS – Select from 1 to 5 for the amount of prints of the marked photo. The
default selection is 1 print.
• SIZE – Select from the following sizes to specify the print size: 100 x 150 mm (4 x 6"), 130 x
180 mm (5 x 7") and 200 x 300 mm (8 x 10"). 100 x 150 mm is the default selection.
• Select FIRMWARE to view the version number of the software that is installed. Visit
www.sandisk.com/registration to sign up for new firmware alerts by e-mail and to download new
firmware versions.

USB Card Reader/Writer Mode

The SanDisk Photo Album can also function as an 8-in-1 USB Card Reader/Writer when connected
to a computer.
NOTE: you can only use ONE USB port on the SanDisk Photo Album at a time; the small USB
connector to connect to the computer OR the large USB connector to connect USB Flash Drives. Do
NOT attempt to use both USB connectors simultaneously.
Windows ME, 2000 and XP: Simply connect the small end of the USB cable to the back of the
SanDisk Photo Album and then connect the other end to the PC. The necessary drivers will load
automatically. Now, the four slots on the front of the SanDisk Photo Album will automatically show
up as four different removable drives in My Computer. You can access files on the memory card as if
it was another drive in the computer.
Windows 98SE:
1. Connect the small end of the USB cable to the back of the SanDisk Photo Album and then
connect the other end to the PC.
2. The New Hardware Wizard window appears. Click the NEXT button.
3. On the next screen, select "Search for the best driver for your device" and click the NEXT button.
4. On the next screen, select only the "CD-ROM drive" option. Insert the SanDisk CD in the CD-
ROM drive and click the NEXT button.
5. Click FINISH when Windows has finished installing the software.
6. Restart the PC. Go to My Computer. The four slots on the front of the SanDisk Photo Album
should now show up as four different removable drives in. You can access files on the memory
card as if it was another drive in the computer.
Macintosh OS 10.1.2+: Connect the small end of the USB cable to the back of the SanDisk Photo
Album and then connect the other end into the USB port on the Mac (do not connect to monitor or
keyboard). A new drive will appear on the desktop when a card is placed into one of the front slots
of the SanDisk Photo Album (you can use only one slot at a time). Drag and drop files to and from
the new drive as you would with any other disk or folder.
6