Console Toolbar; Installing The Software On Your Gps Device - Invion GPS-5V1 Manual De Instrucciones

Console Toolbar

The following options are available from the Console Toolbar:
Install
Lets you install new software to your device.
Software
Install/ Lets you install or remove a map. For more information, see
Remove Maps Installing a Map (on page 44).
Favorites Lets you download a list of your favorite locations from your PC
Importer to the selected My Favorites group on your device. For more
information, see Import Favorite Location (on page 45).
Favorites Lets you download a category of favorite locations from your
Exporter device to a selected folder on your PC. For more information, see
Export Favorite Location on page 47.

Installing the software on your GPS device

You can use the accessories provided with your GPS device along with the
DVD-ROM to install new software on your GPS navigation device.
Note: The GPS device comes with a SD card that is pre-loaded with
software. Do not attempt to install new software unless you have a
technical background and you are sure of what you are doing. For
further information and technical support please visit our website at
www.supportplususa.com.
To install software onto your GPS device you must have Active Sync already
installed on your PC:
1. Open the Console.
. Connect the GPS device to your PC via the USB cable provided.
. When the PC asks you to locate the driver for the new hardware, insert
the DVD-ROM into your PC.
4. From the Target Device window in the Console, click on Change.
5. Select Storage Card as the target device and then click on OK.
6. Click on the Install Software button on the Console.
Figure 33 – Console Toolbar
4