Hanau Springbow Guía De Referencia Rápida página 3

7. Technique hint to achieve smooth move-
ment "Simultaneously push Springbow
downward with left hand and lift clamp
upward with right hand".
NOTE
ORBITALE
TIGHTEN
9. Tighten the vertical clamp 1.
2. TAP
1.
SUPPORT
STEM OF ADJUSTING
BITEFORK HORIZONTAL CLAMP
11. Support the stem of the bitefork with
your middle finger. Lightly tap the
right and left side of the horizontal rod
(note: the bow self centers on the
patient).
HOLD TO
PREVENT
TORQUE
1
ADJUSTING
BITEFORK
CLAMP
13. Tighten clamp 3 which locks the stem
of the bitefork.
VERTICAL
CLAMP
ADJUSTMENT
3.
TAP TO SELF
CENTER
2
TIGHTEN CLAMP 3
ORBITALE
8. Middle finger elevates the pointer and
the bow until the pointer is parallel to
the orbitale.
STORE
POINTER
SUPPORT
BOW
10. Move the pointer to the storage
(neutral) position.
2.
HOLD TO
PREVENT
TORQUE
3.
TIGHTEN
CLAMP 2
BOW HAS
SELF CENTERED
12. Hold the bow at the front left corner to
prevent torquing, tighten horizontal
clamp 2.
MOUNTING PLATFORM
WITH BUILT-IN CAST
SUPPORT
14. Remove the facebow from the patient.
Again, check the thumbscrews for tight-
ness. Send this record with centric, right
and left interocclusal records and impres-
sions to the laboratory.
ELEVATE
BOW
1.
CONTINUE
TO SUPPORT
STEM
2
TRANSFER ROD
ASSEMBLY WITH
BITEFORK
RECORD
TRANSFERRED
TO ARTICULATOR