Konig Computer CMP-WNROUT30 Manual De Instrucciones página 2

Build Network Connections
Please follow the following instructions to setup wireless router:
1. Connect your xDSL / cable modem to the WAN port of router by Ethernet cable.
2. Connect all your computers, network devices (network-enabled consumer devices other than
computers, like game console, or switch / hub) to the LAN port of the router.
3. Connect the A/C power adapter to the wall socket, and then connect it to the „Power" socket of
the router.
AC Power
Please check all LEDs on the front panel. „PWR" LED should be steadily on, WAN and LAN LEDs
should be on if the computer / network device connected to the respective port of the router is on
and correctly connected.
If „PWR" LED is still off and you're sure that all cable connections are connected properly, please
contact your dealer of purchase for assistance.
Internet
ADSL or Cable
Modem
Internet
ADSL or Cable
Modem
Switch/Hub
2
Internet
ADSL or Cable
Modem
Switch/Hub