Before You Begin
This installation guide provides instructions
for installing the DWR-2101. Additional
documentation is also available on the D-Link
support website.
Package Contents
This DWR-2101 package includes the following
items:
•
DWR-2101 5G Wi-Fi 6 Mobile Hotspot
•
Type-C USB Cable
•
Cradle
•
Quick Start Guide
If any of the above items are damaged or
missing, please contact your local D-Link reseller.
Note: To power the unit, charge it using the
Type-C USB cable or use a Type-C 5 V / 2 A
adapter (not included in the package).
Hardware Overview
Interface Buttons
Figure 1: Interface Buttons
# Connector
Power
1
Button
# Connector
Reboot
1
Button
Interface Connectors
# Connector
1
Latch
2
LAN Port
1
Description
Press the power button to power
the device on.
Table 1: Interface Description
1
Figure 2: Interface Buttons
Description
Insert a paperclip in the hole to
press the button, then release to
reboot the device.
Table 2: Interface Description
1
Figure 3: Bottom Connector
Description
Use this latch to remove the back
cover of the device to access the
SIM card and the battery.
Gigabit RJ-45 port for data.
Table 3: Interface Description
2
1