Pack Contents; Installation And Use; Service And Support - Avid pinnacle PCTV teleScope 73a Guia De Inicio Rapido

Sample illustrations are to be found on the first page.
1. Pinnacle PCTV teleScope (73a) for receiving digital terrestrial television consisting of an antenna
unit (rod antenna) and base receiver unit with USB cable.
2. Mini remote control with battery(/batteries)
3. Antenna adaptor
4. Installation disk with software, drivers and documentation
5. Quick Start Guide
* Please note: the pack contents may vary from that illustrated depending on the version of your
product.
I. Connnecting the antenna
You can either use your PCTV teleScope with the integrated antenna or alternatively connect an
external antenna.
a) Using the antenna unit with built-in pre-amplifier (see Figure I.a)
The pre-amplifier (signal booster) can be switched on and off with the software supplied.
Please note: the rod antenna can be rotated 180° to adapt to the selected positioning type - on a
vertical smooth surface (e.g. on a window pane) or on a horizontal surface. Please also read Section II
„Fixing the base unit".
OR
b) Using a roof or room antenna (see Figure I.b)
For this, carefully twist off the rod antenna with a light twisting movement and connect the base unit to
your roof or room antenna with the antenna adaptor supplied.
II. Fixing the base unit (see Figure II)
The base unit (with or without the attached rod antenna) can be fixed with a magnet or a suction cup.
The combined magnet/suction cup socket can be removed by pressing the surface labelled PUSH on
the back of the base unit and replaced rotated by 180° if the other fixing type is desired.
Tip: if metallic surfaces are available we recommend fixing with the magnet when using the antenna
unit, as this can improve PCTV teleScope's reception characteristics.
III. Connecting a computer
Please connect now the Pinnacle PCTV teleScope to one of your computer's USB 2.0 ports.
Please note: If you use your PCTV teleScope with the antenna unit, please position this as high and as
close to the window as possible. The reception depends on the location and can be affected by thick or
steel-reinforced walls and also neighbouring buildings. An external or roof antenna is required in such
environments. For the best possible reception in regions with a weaker signal, we recommend
connecting Pinnacle PCTV teleScope to your roof or room antenna with a dual-shielded antenna cable.
Mobile DVB-T reception, e.g. in the car or train, is not generally possible.
In order to prevent possible damage by the antenna foot's magnetic field, please ensure that an
adequate distance to magnetically sensitive components is maintained.
IV. Installing the software
You require adminstrator rights to install the software on your Windows PC.
Should the "Add new software" dialog appear during installation, click the Cancel button.
Place the installation disk in the appropriate computer drive; a welcome dialog is automatically
shown if the Autorun function is activated. Otherwise, navigate to your DVD drive and double-click
the Launcher file.
Select the TVCenter Pro entry via the welcome dialog.
Then follow the instructions displayed on the screen.
Following installation, you may be asked to reboot your computer. In this case, please restart your
computer so that the software works properly.
V. Using the remote control
If you wish to operate Pinnacle PCTV teleScope with the remote control supplied, please ensure that the
remote control is pointed directly at the Pinnacle PCTV telescope housing.
Please do not forget to register your product at
to use our comprehensive customer support.
To receive technical support, visit
Avid Technology GmbH hereby declares that this TV reception device conforms to the fundamental
requirements and other relevant regulations of guideline 89/336/EEC.
CE and FCC conformity declarations and conformity of structure declarations can be accessed at
http://www.pinnaclesys.com/compliance.

Pack Contents*

Installation and Use

Service and Support

http://www.pinnaclesys.com/register
http://www.pinnaclesys.com/support
CE/FCC Conformity
Subject to design/technology modifications.
in order to be able
and select your product.