IR REMOTE CONTROL BENDER
English
1. Introduction
Important environmental information about this product.
This symbol on the device or the package indicates that disposal of the
device after its lifecycle could harm the environment. Do not dispose of
the unit (or batteries) as unsorted municipal waste; it should be taken to
a specialized company for recycling. This device should be returned to your
distributor or to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, don't install or use it and contact your dealer.
Contents: 1 x signal bender, 6 x IR probe, 1 x IR receiver with 1.2m cable, 1 x
PSU and this manual.
The R-W320-T allows you to operate up to 6 of your A/V devices inside a
cabinet without having to open the door. The infrared remote control bender
enables you to extend the range and angle of your common remote control which
is only effective at close range. The bender receives the IR signal from your
remote control and retransmits it via an IR probe to any other device.
2. Safety Instructions
Keep the device away from children and unauthorized users.
There are no user-serviceable parts inside the device. Refer to an
authorized dealer for service and/or spare parts
R-W320-T
3
User Manual