Husky 934 631 Guía De Uso Y Cuidado página 5

Operation
CHANGING THE DISPLAY UNITS
1. Press the
measurement units between degrees (°),
pitch (in/ft), and slope (%). Figure 2 shows
an example of the LCD display showing a
degree measurement.
2. Press the Hold button to capture the
temporary reading.
3. Press the
Ft unit. Figures 3 and 4 show the pitch
H=67/8 inch (H=L*tan α, L=1feet, α =
30.0°).
4. Press the
of the surface H=57.7cm (H=L*tan α, L=100 cm,
α=30.0°), as shown in Figures 5 and 6.
button to convert the
button to shift to in./
button again to get the slope
Figure 2
Figure 3
H = L * tan α
H
α
L
Figure 4
Figure 5
α
H = L * tan
H
α
L
Figure 6
1