Change Settings - FITFIU FITNESS TREKKING Manual Del Usuario

CHANGE SETTINGS

Press and hold the "+" and "-" buttons simultaneously to enter the settings:
Press "M" to change between the settings, press "+" to increase the values and press "-" to decrease them. Press "+"
and "-" again simultaneously to exit the setting mode.
FUNCTIONS:
1. Front light:
2. Current level status (Requires support with certain regulators):
3. Voltage level status:
4. Multifunctional display area:
- Total Mileage "ODO"
- TRIP" Travel Mileage
- Voltage "VOL"
- Current "CUR"
- Mileage at rest "RM"
- Remaining travel time "TIME"
5. Digital speed display:
- Current speed "CUR"
- Maximum speed "MAX"
- Average speed "AVG"
- Unit of measure: MPH, KM/H
6. Fault display area:
- Engine
- Accelerator
- Controller
- Brake switch
- Battery
7. Attendance status display area:
- Attendance Level (Level 0-5)
- Accelerator function 6Km/h
PROGRAMS
• P00. Set the value to 10 and change to the next setting, the display items will show all contents and restore the
original factory settings.
• P01. Screen background brightness: 1 = darker, 2 = medium, 3 = brighter.
• P02. Speed display setting: 0 = KM, 1 = MILLA.
•
P03. Voltage configuration: 24V, 36V, 48V, (36V = standard by default).
• P04. Activity time: 0 = no activity, 1-60 = other values indicate the number of minutes.
• P05. Gears
- Mode 0/3: Speed 1 (2V), Speed 2 (3V), Speed 3 (4V).
- Mode 1/5: Speed 1 (2V), Speed 2 (2.5V), Speed 3 (4V), Speed 4 (3.5), Speed 5 (4V).
•
P06. Wheel diameter: unit = inches.
• P07. Number of magnetic steel speed measurement. Range: 1-100.
• P08. Speed limit: Range 0-50 Km/h, 50 means there is no limit.
•
P09. Setting start from stop. 0 = Direct start, 1 = No start.
ELECTRIC BICYCLE TREKKING
57
EN