Publicidad
Enlaces rápidos
a
d
f
g
j
1/4" (6 mm)
c
b
k
l
e
h
I
8 in-1 Closet Organizer
Installation Instructions
Organizador para Closets 8 en 1
Instrucciones de instalación
Before You Begin
1. Remove product from packaging and carefully inspect all
parts. (See Parts List below.)
2. Please read all instructions carefully before beginning.
Antes de empezar
1. Remueva el producto del paquete y cuidadosamente
inspeccione todas las partes. (Vea la lista de partes
abajo).
2. Haga el favor de leer todas las instrucciones cuidadosa-
mente antes de empezar.
Parts List
a. SuperSlide™ Shelves (4) 02-45640
b. 60" Standards (6) 00-2808
c. Shelf Brackets (17) 02-42853
d. 40" Hang Tracks (2) 01-28266
e. SuperSlide™ Bar Support (7) 01-856
f. 5' Hanger Bar (1) 01-870
g. 3' Hanger Bar (2) 01-681
h. Hanger Bar End Caps (6) 01-684
i. Shelf End Caps (32) 01-603
j. 3/16" Toggle Bolts (16) 01-270/01-274
k. #12 x 2" Pan Head Screws (16) 01-688
l. 1/4" Anchors (16) 01-650
Lista de partes
a. Repisas SuperSlide™ (4) 02-45640
b. Rieles Verticales de 1,52 m (6) 00-2808
c. Soportes de Repisa (17) 02-42853
d. Rieles Horizontales de 1 m (2) 01-28266
e. Soportes para Barra Colgadora SuperSlide™
(7) 01-856
f. Barra Colgadora de 1,52 m (1) 01-870
g. Barras Colgadoras de 91 cm (2) 01-681
h. Tapones para Barra Colgadora (6) 01-684
i. Tapones para Repisa (32) 01-603
j. Pernos de Palanca de 4,7 mm (16) 01-270/01-274
k. Tornillos de Cabeza Redonda #12 x 5 cm (16) 01-688
l. Tarugos de 6 mm (16) 01-650
Tools and Materials
Herramientas y materiales
#2890
8' (2,44 m)
T
Publicidad
Manuales relacionados para Emerson CLOSETMAID 2890
Resumen de contenidos para Emerson CLOSETMAID 2890
- Página 1 #2890 8' (2,44 m) 8 in-1 Closet Organizer Installation Instructions Organizador para Closets 8 en 1 Instrucciones de instalación Before You Begin 1. Remove product from packaging and carefully inspect all parts. (See Parts List below.) 2. Please read all instructions carefully before beginning. Antes de empezar 1.
- Página 2 Measure and Fit This closet organizer will fit a maximum closet wall area of 8'. Even in cases where the clos- et may be larger, the maximum allowable distance between Hang Tracks is 16" (which means a TOTAL wall space of 8'). Do not attempt to exceed total closet wall area of 8'. 1.
- Página 3 Install Hang Track DRYWALL MURO SECO To install Hang Track into drywall: IMPORTANT: For opti- 1. Drill 1/2" holes at marked locations on wall. 2. Remove toggle from bolt. Insert bolt through hole in Hang mum performance, align Track and re-install toggle onto end of bolt. holes 1, 3, and 5 (count- 3.
- Página 4 Install Shelves 1. Determine if the Shelf design you have chosen requires cutting the Shelves. See "Shelf Design Options." Note: There are four 5' Shelves supplied. If necessary, cut Shelves with a hacksaw or boltcutter in one inch incre- ments. We recommend cutting Shelf from end that will be closest to side wall.