Installing Your Icsa; Attaching Restraint Belt; Attaching Icsa To Stroller - B.O.B Duallie Guia Del Usuario

BOB Gear by Britax

Installing Your ICSA

Attaching Restraint Belt

WARNING!
Failure to properly attach
restraint belt may result in
serious injury or death�
1� Prepare stroller
Set parking brake, rotate canopy
towards handlebar (see stroller
user guide if necessary).
2� Install restraint belt
Using a screwdriver, thread the
captured screw with buckle (male)
completely into anchor nut on
right side of stroller accessory
adapter and tighten firmly.
Then thread the captured screw
with buckle (female) completely
into anchor nut on left side of
center canopy mount (center
of stroller between seats) and
tighten firmly.
NOTE: See "Duallie Center
Canopy Mount" on page 4 for
possible anchor nut locations.
6
Restraint Belt Installed
Right Side

Attaching ICSA to Stroller

WARNING!
Failure to attach ICSA securely
to stroller may result in serious
injury or death�
1� Prepare stroller
Set parking brake, rotate canopy
towards handlebar (see stroller
user guide if necessary).
NOTE: For strollers manufactured
prior to September 2015, slide the
covers at the front of the stroller
accessory adapters down to
expose the receiver sockets.
Center
Anchor
Nut