Fleck ELECTRONIC SXT Serie Manual De Uso página 17

1.1
1.1.1
E
N
G
L
I
Fig.1
S
H
Fig.2
1.1.2
1.2
1.2.1
16
1 - VALVE OPERATION
Service
Service display
In operation, in volumetric mode, the time of the day and the volume remaining will alternatively
be displayed. In time clock mode, the display alternates between the time of day and the
remaining days. In Twin mode, the time of the day, volume remaining and tank in service displays
will alternatively be displayed.
Time of day Remaining volume: 2350 litres
Time of day setting
Press and hold the buttons
display.
Use and buttons to adjust, then press the button
Regeneration
regeneration displays
During the regeneration cycle, the valve will show the cycle number name it is advancing to
(flashing display) or has reached as well as the time remaining in that cycle (fixed display). Once
all the regeneration cycle steps have been completed the valve will return to the service position.
The valve goes to backwash cycle,
the letters "BW" are flashing.
The valve is in backwash position; the display indicates the
remaining time.
Remaining days before
If the remaining volume is superior to 9999 litres, "x1000" appears to
indicate that the numbers shown have to be multiplied by 1000
Ex: 10.5x1000 = 10500 litres of capacity.
In volumetric regeneration mode, these two displays indicate:
- Fig. 1: "consumed" reserve, 180 litres remaining (or available ?)
- Fig. 2: exhausted reserve, immediate or delayed start in regeneration
depending on the adjustment.
In delayed volumetric mode, the icon
(if there is) begins to be used.
or until the icon
Regeneration cycles
1. BW Backwash
2. BD Brine draw
3. RR Rapid rinse
4. BF Brine fill
Tank in service,
next regeneration Twin mode : 9000/9100/9500
flashes as soon as the reserve
and the letters « TD » appear on the
to return in service.
ELECTRONIC SXT