Key Functions - CPS PRO-SET CC800A Serie Manual De Instrucciones

INTRODUCTION
The CC800A is the state of the art battery operated weighing and charging scale. The CC800A
has been designed to be accurate, rugged and reliable over a large weighing span (220 lbs/ 100kg).
The CC800A can also charge the high-pressure refrigerant R-410A. The CC800A incorporates a
hand held unit with 7 keys and an extra large LCD display for easy viewing. A space saving
flex-cord interconnects between the hand held unit and the platform. The platform incorporates a
corner adjusted, heavy-duty load cell. The blow molded case houses the 9VDC solenoid valve
with 1/4 SAE inlet and outlet ports.
Included with the CC800A: mechanical hook and magnetic pad for the hand held positioning and two 9VDC battery.

KEY FUNCTIONS

• POWER
- Press once to turn power ON while it is OFF. Press and hold for 1 second to turn
power OFF while the unit is ON. This also clears all memory and settings.
• UNITS
- Press and hold for 1 second to change the current unit (kg to lbs or lbs to kg).
Note: While turning the unit ON, it will display kg or lbs depending on the last display before shutting OFF.
• TARE
- Press and hold for 1 second to tare while the unit is in the WEIGHING mode. It returns
the display to"00.00" in the SETTING mode. The TARE key is not active while the unit is in the
HOLD mode. In the SET mode the TARE key will reset the programmed amount to zero.
• GO/HOLD
- Initiates the CHARGING or RECOVERY modes per the data entered after
pushing the SET key. The data entered will determine how long the solenoid valve will remain
open. Also while operating in the CHARGE or RECOVERY modes, pressing this key again will put
the CC800A in the HOLD mode. Pressing it once again returns to CHARGE or RECOVERY modes.
Increase the weight display, one resolution unit (0.25oz or 10g) for every actuation or continuously
if held down. A beep sounds when the display reaches its maximum load capacity of 220lbs (100kg).
Decrease the weight display, one resolution unit (0.25oz or 10g) for every actuation or
continuously if held down. A beep sounds when the display reaches zero.
• SET/RESET
- Puts the instrument in the CHARGE or RECOVERY data input mode. Pressing
the key again will return the CC800A to the WEIGHING mode. Also pressing this key while in the
CHARGE or RECOVERY modes will terminate that mode and put the CC800A back into the
WEIGHING mode.