Publicidad
Specifications
Spécifications
Technische Daten
Specifiche
Especificaciones
Catalog No.
Voltage
Référence
Tension
Bestell-Nr.
Spannung
N. Catalogo
Tensione
Referencia
Voltaje
1492-AIFM8-3
0 - 132V AC / DC
1492-RAIFM8-3
Catalog No.
Maximum Recurring Peak Voltage
Référence
Tension de crele réurrente maximale
Bestell-Nr.
Maximale periodische Hochstspannung
N. Catalogo
Tensione massima di cresta ricorrente
Referencia
Voltaje de cresta iterativo máximo
1492-AIFM8-3
1492-RAIFM8-3
For transients > 600 Vp use a UL recognized suppression device rated at 2.5 kV withstand.
Pour des transitoires > 600 Vp utilisez un dispositif de suppression certifié UL à 2,5 kV nominal de tenue.
Für Einschaltstöße > 600 Vp verwenden Sie einen UL anerkannten Entstörer, der bewertet wurde bei 2,5 kV standzuhalten.
Per transitori > 600 Vp usare dispositivo di soppressione riconosciuto da UL capace di sopportare 2,5 kV.
Para transitorios > 600 Vp use un dispositivo de supresión reconocido UL clasificado con 2,5 kV.
Non-condensing
Sans condensation
Nicht kondensierend
Senza condensa
sin condensación
Power, input and output (I/O) wiring must be in accordance with Class I Division 2 wiring methods - Artticle 501-10(B)(1) of the National Electrical Code.
WARNING
Explosion Hazard - substitution of components may impair suitability for Class I Division 2.
Explosion Hazard - Do Not Disconnect Equipment unless power has been switched off or the area is known to be Non-Hazardous.
Add 0.39 in. to the width dimension for 1492-Rxx type modules.
SURGE SUPPRESSION follow the literature recommendations of the PLC module being used.
La section SUPPRESSION DES SURTENSIONS se trouve à la suite de la littérature qui contient les recommandations relatives au module PLC utilisé.
ÜBERSPANNUNGSSCHUTZ Bitte beachten Sie die Dokumentationsempfehlungen für das jeweils benutzte SPS-Modul.
Per la SOPPRESSIONE DEI PICCHI TEMPORANEI, seguire le istruzioni riportate nella documentazione in dotazione al Modulo PLC utilizzato.
SUPRESIÓN DE SOBRETENSIÓN, siga las recomendaciones indicadas en la documentación del módulo PLC respectivo.
Reference Publications: Refer to 1770-4.1 and appropriate PLC I/O module installation manual.
PN-104504
DIR 40063-326 (Version 11)
Printed in U.S.A.
Current / Circuit
Current / Module
Courant / Circuit
Courant / Module
Strom / Schaltkreis
Strom / Modul
Corrente / circuito
Corrente / modulo
Intensidad / circuito
Intensidad / módulo
2 Amps
Humidity
Humidité
Feuchtigkeit
Humedad
Umidità
600 V
5 - 95%
p
#Terminals / Shield Common
Nbre bornes / blindage commun
Anzahl der Terminals / Abschirmungsmasse
#Terminali / comune dello schermo
#Terminales / Protector común
12 Amps
8
Approx. Shipping Weight
Poids d'embarquement approximatif
Ungefähres Versandgewicht
Peso approssimativo del carico
Peso aproximado al momento de
embarque
.64 lb.
(289 g)
Operating Temperature Range
Plage températures de fonctionnement
Betriebstemperaturbereich
Limiti temperatura di funzionamento
Rango de temperatura de funcionamient
Dimensions
Standards
Dimensions
Normes
Abmessungen
Standards
Dimensioni
Standard
Dimensiones
Estándares
cULus (File: E10314, Guide No. NRAG)
Suitable for use in Class 1 Div 2 Groups A,
B, C and D Hazardous and Non-Hazardous
Locations.
4.33 in. (110 mm) W
Temperature Code = T3C at 60°C
3.27 in. (83 mm) H
CE: Compliant for all applicable directives
2.74 in (69.5 mm) D
FM Class 1 Div 2 Groups A, B, C and D
Temperature Rating T3C = 60°C (J.I. 3000590,
all except relay modules)
0° C - 60° C
Publicidad
