Dynex DX-IPDR Guia Del Usuario

iPod® Docking Station with Remote
Station d'accueil iPod® avec télécommande
Estación de Acoplamiento iPod® con Control
Remoto
DX-IPDR
USER GUIDE
GUIDE DE L'UTILISATEUR I GUÍA DEL USUARIO
DX-IPDR.indd 1 DX-IPDR.indd 1
Box Contents
• Docking station
• AC power adapter
• AV cable (5 feet)
• Sync cable (6 feet)
• S-Video cable (6 feet)
• Universal dock adapter (8)
• Remote control
Setting Up
Connecting your iPod to the docking station
1 Connect the universal
dock adapter
appropriate for your
iPod to the docking
station.
For...
iPod Mini (4 GB/6 GB)
iPod (20 GB/U2 Special Edition)
iPod (40 GB)
iPod with color display (20 GB/30
GB/U2 Special Edition)
iPod with color display (40 GB/60 GB)
iPod Nano
iPod Video (30 GB)
iPod Video (60 GB)
2 Place your iPod in the docking station.
3 Remove the plastic tab on the remote control before
using the fi rst time.
Connecting to a TV using the S-Video or A/V
cable
1 To connect S-Video,
plug the S-Video
cable into the docking
station and your TV.
2 To connect standard
video, connect the A/V
cable into the docking
station's 3.5mm
auxiliary jack, then
connect the yellow
RCA plug to your TV's
yellow Video In jack.
Connecting to an external audio device
1 To connect external
audio, connect the
A/V cable into the
docking station's
3.5mm auxiliary jack,
Use this adapter...
then connect the red
3
and white RCA plugs to
4 your audio device's red
and white Audio In jacks.
5
6
Connecting power using the USB sync cable
1 Plug the AC power
7
adapter into an AC
8
power outlet.
9
2 Plug the USB sync
10
cable into the USB
port on the AC power
adapter and the 30-pin
connector on the back of your docking station.
3 You may control your iPod charging mode using the
ON/OFF switch located on the side of your docking
station.
A/V cable S-Video cable
A/V cable S-Video cable
4/22/2006 11:43:02 AM 4/22/2006 11:43:02 AM