General Tips - Corsair HS70 PRO WIRELESS Manual De Instrucciones

ENGLISH ENGLISH
CHARGING 2
CHARGING WHILE POWER IS ON – "Play and Charge Mode": When the headset is ON, and
CHARGING with a connected USB cable, the Status LED reports the charge and battery status.
Status LED displays:
AMBER: Nominal battery (0%-89%)
GREEN: Fully charged (90%-100%)
CORSAIR iCUE
Go to corsair.com/support/downloads to download the CORSAIR iCUE software.
Using iCUE software will enable the full feature set of the HS70 PRO WIRELESS headset.
Note: If the headset is used without software, some features will be disabled.
> Install the iCUE software on a PC running Windows 7, Windows 8.1, Windows 10 or later.
> After installation is complete, reboot your PC, and launch iCUE.
iCUE software can be used to:
> Select and customize audio equalizer (EQ) settings.
> Adjust microphone input volume.
> Set 7.1 surround sound on or off.
The software's built-in documentation explains how to use the HS70 PRO WIRELESS's
features in greater detail.
3 3

GENERAL TIPS

For optimal wireless performance:
> Place the wireless USB transmitter in an open, unobstructed area.
> The wireless USB transmitter requires a powered USB port (100mA).
For optimal battery life:
> Make sure the battery is fully charged before initial use.
> Do not leave the battery fully discharged for long periods. Battery life is maximized by keeping the battery in a
partially charged state.
> Remove the USB charging cable promptly after the headset has been fully charged.
> Keep the headset at room temperature (20-30°C or 68-86°F).
For the best audio performance:
> Download the CORSAIR iCUE software from corsair.com/support/downloads.
> Don't be afraid to use the software equalizer to adjust the audio quality to your liking. EQ presets have been
provided for popular gaming and media types.
> Prolonged listening at high volumes may adversely affect your hearing. Take breaks between sessions and
always begin with the volume at the lowest possible level before increasing.
and always begin with the volume at the lowest possible level before increasing.
VOLUME
Place the headset on your head and adjust the headband for a comfortable fit. The extra-large ear pads
enable the HS70 PRO WIRELESS headset to fit comfortably so you can play for hours without fatigue.
As with any audio product, reduce the volume before trying it with an audio source the first time.
You can adjust the volume with:
> The volume controller on the headset at the bottom corner of your left earcup.
> The standard Windows audio controller can also be used to adjust volume.
> On PS4, use the PS4 audio settings to adjust the master volume output first (Settings -> Devices -> Audio
Devices -> Volume Control Headphones). The volume control on the headset provides additional adjustment.
Once and audio source is playing, set the volume to a comfortable level.
To use the microphone, adjust it so that it's between 1–2 inches (2.5cm to 5cm) away from your mouth.
ENGLISH
Take breaks between sessions
4